Vauxhall / Opel

Programming OP-COM – technical instructions

Special function programming instructions for Vauxhall, Opel and Buick vehicles

  • ACTIVATION OF WINDOWS
  • CLEARING THE SERVICE INSPECTION
  • SETTING UP SERVICE INSPECTION
  • SETTING YOUR DAYLIGHT
  • ACTIVATING FAULT MESSAGES
  • TURNING OFF THE BAGS OF UNBEED BELTS
  • INJECTORS DIAGNOSTICS IN CDTI
  • ACTIVATION OF CLOSING CLOSES WITH DESCRIBED SPEED
  • DPF FILTER DENSITY CONTROL
  • ACTIVATION OF THE AIRBOOK COMPUTER
  • ACTIVATING THE STOP LOCKING DURING BRAKING
  • ACTIVATION / DEACTIVATING DIMMING
  • ACTIVATION OF LIGHTS IN REAR DOORS
  • ACTIVATION OF RAIN SENSOR
  • ACTIVATING THE TEMPOMAT
  • ACTIVATION OF THE LIGHTER BACKLIGHT
  • ACTIVATION OF BRAKE PADS SENSOR
  • ACTIVATING THE HEADLAMP WASHES SENSOR

ACTIVATION OF WINDOWS

click the diagnostics/ year of the car/ model car
body
we choose REC (rear electronic assembly)
– testing of window closing elements
– click the test of actuators
– we choose “comfortable closing test” – click “activate”
– if the windows open, click ‘stop’
we go back to point 5 and choose as follows
– Programming
– configuration of program variants (enter SECURITY CODE)
– we choose “comfortable closing windows” and change to “occur”.


CLEARING THE SERVICE INSPECTION

1. click the diagnostics/ year of the car/ model car
2. body
3. we choose IPC
4. we choose ‘programming’
5. we enter the ‘delete inspection’
6. press the brake pedal and click ‘yes’


SETTING UP SERVICE INSPECTION

1. click the diagnostics year of the car model car
2. body
3. we choose IPC
4. we choose ‘programming’
5. choose ‘configurations of the program variant’ (enter the Security Code)
6. In the “Service inspection interval” lines, select the appropriate parameters, either time or distance.


SETTING YOUR DAYLIGHT

1. click the diagnostics year of the car model car
2. body
3. UEC / REC
a) We choose UEC
– we choose ‘programming’
– we choose ‘configurations of the program variant’ (enter the Security Code)
– we enter the daylight and set one of the 5 variants

b) – We choose REC
– we choose ‘programming’
– we choose ‘configurations of the program variant’ (enter the Security Code)
– we enter the daylight and set one of the 5 variants

The most preferred option is option 5. The lights ignite only after the engine is ignited. In the position of the parking lights you can turn them off. Only the lights in the front light up. The radio console and lamps on the back do not light up, and registration, which is a typical day version, as it is in new cars. In addition, the display is not dimmed as it normally is when the lights are on. If we turn to the position of the low beam (ie at night) everything lights up normally, that is, together with the board, registration and back lamps. If, for example, in the winter time we want the lights in the back to shine, we have to enter the REC and set the option 5 there.


ACTIVATING FAULT MESSAGES
(burnt light bulbs, liquid shortages, etc.)

1. click the diagnostics year of the car model car
2. body
3. we choose UEC
4. choose “Programming”
5. Configuring program variants (enter Security Code)
6.In the line “Fault control” set to OVERLOOK
7.Program and OK


TURNING OFF THE BAGS OF UNBEED BELTS

1. click the diagnostics year of the car model car
2. body
2. We choose SDM
3. click “Programming”
4. Select ‘Program ECU’
5. in the line “Signal state with unfastened seat belts” we change the parameter, on ‘on, off’
6. Click on “Perform SBR coding”


INJECTORS DIAGNOSTICS IN CDTI

1. click the diagnostics year of the car model car
2. choose the engine / model
3. we choose “special functions” and we have the parameters of individual injections, of course on a lit engine and at a standstill. The correct parameters should oscillate from -0.5 to 0.5.


ACTIVATION OF CLOSING CLOSES WITH DESCRIBED SPEED

1. click the diagnostics year of the car model car
1st body
2. Click REC
3. Programming
a) Configuration of program variants (enter Security Code)
b) in the position “Speed-dependent door locking” change to “Occurs”
c) click “Program” and OK
4. Go back to point 2
5. We choose UEC
6. Programming
a) Configuring program variants (enter Security Code)
b) in the position “Unlocking relay during an accident” change to Occurs
c) click “Program” and OK
7. We start the engine
8. Press and hold the door locking button – the locks lock after 4 seconds and open themselves

Now, after reaching 15 km / h, the locks will close automatically.
The locks open in the situation:
– removing the key from the ignition
– pulling the internal handle
– pressing the door locking button (optional, depending on the vehicle version)
– during an accident (optional, depending on the vehicle version)


DPF FILTER DENSITY CONTROL
(particle filter)

1. click the diagnostics year of the car model car

we choose the model engine
3. we choose measuring blocks
4. On the list, we find interesting poems:
a. DPF saturation (in%)
b. Distance traveled from the last firing (in km)
c. DPF filter regeneration (in%)
d. DPF pressure differences


ACTIVATION OF THE AIRBOOK COMPUTER

Older year
1. click the diagnostics year of the car model car
2. Information-Entertainment (Infotainment System)
3. Programming
4. click select the appropriate Index Code from BC

newer years

1. click the diagnostics year of the car model car
2. Information-Entertainment (Infotainment System)
3. DIS
4. Programming
5. choose “Configuring program variants” (enter Security Code)
6. in the line “On-board computer” select “Occurs”
7. We go back to point 4.
we choose “Program code index”
click select the appropriate Index Code from BC
Program and OK


ACTIVATING STOP
during sharp braking (emergency lights are not blinking)

1. click the diagnostics year of the car model car
2. Body
3. choose REC
4. Programming
5. choose “Configuring program variants” (enter Security Code)
6. in the line “Brake light warning function” change to “Occurs”


ACTIVATION / DEACTIVATION OF THE MIRROR WITH PHOTOCHROM
during sharp braking (emergency lights are not blinking)

click the diagnostics year of the car model car
Body
we choose REC
programming
we choose “Configuring program variants” (enter Security Code)
in the line “Dimming rear view mirror”, select “Exists” or “Does not exist”


ACTIVATION OF LIGHTS IN REAR DOORS

click the diagnostics year of the car model car
Body
we choose BCM
programming
we choose “Configuring program variants” (enter Security Code)
in the row “Rear side lights”, select “Occurs”


ACTIVATION OF RAIN SENSOR

click the diagnostics year of the car model car
Body
we choose UEC or REC or BCM
programming
we choose “Configuring program variants” (enter Security Code)
in the line “Sensor rain / light” select “Occurs”


ACTIVATING THE TEMPOMAT

click the diagnostics year of the car model car
we choose the engine / model
programming
in the line “Cruise control”, select “Occurs”

click the diagnostics year of the car model car
Body
we choose CIM and / or IPC
programming
we choose “Configuring program variants” (enter Security Code)
in the line “Cruise control”, select “Occurs”


ACTIVATION OF THE LIGHTER BACKLIGHT

click the diagnostics year of the car model car
Body
we choose CIM and / or IPC
programming
we choose “Configuring program variants” (enter Security Code)
in the line “Front Cigarette Lighter” select “Occurs”


ACTIVATION OF BRAKE PADS SENSOR

click the diagnostics year of the car model car
Body
we choose BCM
programming
we choose “Configuring program variants” (enter Security Code)
in the line “Brake pad sensor” select “Occurs”


ACTIVATING THE HEADLAMP WASHES SENSOR

click the diagnostics year of the car model car
Body
we choose UEC
programming
we choose “Configuring program variants” (enter Security Code)
in the line “Headlight sprinklers” select “Occurs”

LEAVE A RESPONSE